The ICM495 is a UL Listed Electrical Disconnect with an Internal
Surge Protective Device built-in. The ICM495 is available in two models
30A Fused and 60A Non Fused. The included Surge Protective Device is
intended for 120VAC Single-Phase or 240VAC Split-Phase configurations.
Designed to protect equipment from transient surges. The ICM495 is a
great low cost option to protect some of the most valuable equipment on
the property, including: Air conditioning units, heat pumps, mini-split
systems, pool & spa equipment and more…
SPECIFICATIONS:
Service Voltage: Split
Phase 240 VAC; 30A at -40°C min. and 25°C max., 240 VAC; 25A at -40°C
min. and 55°C max., 240VAC; 60A at -40°C min. and 55°C max.
Short Circuit Current Rating (SCCR): 10 kA
Maximum Surge Current: 100 kA (single event)
Nominal Discharge Current (In): 20 kA (15 multiple events)
SPD Type: Type 2 applications only
Surge Protection Technology: TFMOV
Protection Mode: L1-L2, L1-G, L2-G
Maximum Continuous Operation Voltage (MCOV): L-L: 300 VAC, L-G: 150 VAC
VPR (Vpk): Mode: L-L = 1200, L-N = 700
Input Power Frequency: 50/60 Hz
Diagnostics: Green LED indicates surge protection present
Enclosure Rating: NEMA/Type 3R metal enclosure for outdoor and indoor installation
Installation Point: Located within sight of the motor controller/equipment
Dimensions: 9.0” L x 5.25” W x 2.50” D
Operating Temperature: -40°F to 131°F (-40°C to 55°C)
Operating Humidity: Less than 85%, non-condensing
Operating Altitude: Less than 2000 meters
Agency Certification and Approvals: ANSI/UL1449 5th Edition cULus Listed Device
WEIGHT/DIMENSIONS:
9.00” x 5.25” x 2.50”
